Boot time has been hard mad

I have three hard disk hung on the machine, 1T 500G 250G of the SATA2 are now put up as long as the 250G will only be able to boot into windowsXP blue progress bar that, the hard disk light flash mad.Is not linked to the 250G will be able to smoothly enter the system.Enter 250G on the system again in future only through hardware refresh manager for a long time after the detection of the N type, letter still can not see.'s Problems before the operation:250G (a district as a whole) is formatted last night after he entered the 40G video material ISO format.Boot off twice today, the second shutdown before the 500G hard disk all the things Kaodao 1T of the hard disk in preparation for the resumption of WinPE with the re-zoning 500G, on the results of the above-mentioned issues.In other words, 1T and no problem with the 500G, 250G is the problem, but the problem is not fixed before the 250G hard disk

250 under Formatting first virus scanning, detection software testing hard about whether or not the partition table scanning errors, bad area, and other factors! Should pay special attention to the voices of a normal hard disk.Unless they view the board's support for the hard disk array model on behalf of the little lights flash.'s Time to drive in the hard disk, and so is bright.IDE channels only show that there is only data transmission.
You IDE channel is already occupied by the light.(Default 3)
ask.Sata that the other is 1 or 2 on behalf of the generation?