Need help with IDE and SATA troubles?

i am in the way of having my pc that i built launched and established and ive click a outlet.i have got an IDE HDD and a SATA HDD and an IDE dvd drive around the same cable for the reason that IDE HDD, now originally there was a problem with the cd get, however we surmised this became because that your HDD acquired a jumper in it set to get down and this cd generate didnt.so i’ve unplugged till i will get your jumper to test, but also after i have both the HDD plowed in, it informs me (despite my family setting it as well from this IDE HDD has my COMPUTER ITSELF on from the BIOS) so it cant find or you’ll find files lacking etc though the problem fixes after i unplug this sata travel, why are these claims happening Can SATA generally take goal over IDE or will there be something concerning missed and as well im a little bit worried as and this my MOBO seems as if where your SATA ports are:
SATA2 SATA4
(port) (port)
SATA RAID
SATA1 SATA3
(port) (port)
are these the right places with luck to often be plugging your SATA commute in
thanks with the help

The laptop has settings in the BIOS which in turn specify trunk order (also often known as boot priority) – You will need to change this to make your purchase be:
CD-ROM, IDE Harddrive, SATA tough drive

Since I are not aware of what motherboard or BIOS you might be using, I can’t be very precise on how to do that…but when you turn on your pc, if a person hit this delete key or it could be F1 or even F2 you can enter your BIOS configuration display and seek out around and find the idea.

These days, getting your own two IDE units working together within the single conductor, that are going to be a tiny bit of reckon work.:) Every IDE device I have ever observed has jumper controls to let you set Grasp, Slave, or perhaps ‘Cable Select’/’CS’/Auto.You must put your disk drive and CD-ROM both that they are on Conductor Select, then the master/slave are going to be determined by way of whether its around the end from the cable or the center.Unfortunately, in case you are missing that jumper, you’re likely to must play about and see when you can make a thing else job.

Should the CD-ROM is within CS mode without getting a jumper, then set your IDE harddrive to CS, then you should be fine.When you can only have your CD-ROM for being slave, then just simply set your disk drive to always be master and you should be good.If your CD-ROM is merely set that they are master, then arranged your harddrive to be slave.

You’ll be able to force master/slave about either connector, also , you can shoe from sometimes master or perhaps slave.This is due to ‘master’ in addition to ‘slave’ are certainly not really suitable terms – the ‘master’ isn’t going to get priority in the slightest, it just occurs first.

Step YOU:Let’s prepare yourself for removing “Windows are unable to find” problem message

First of all, backup your registry.The good idea is to create Home windows Restore Level.This can save your valuable operating system just in case of urgent situation.

Open up Regedit and also Msconfig products.We’ll will need them together.If virus got deep, I recommend you trying to find and downloading a plan called Autoruns, which exhibits and allows to disable considerably more autorun records than normal Msconfig.

Step 2:Searching with the file Home windows cannot uncover ourselves

Bear in mind the name of document from “Windows cannot find” dialog.The first question we o