F1 shield boot

In BIOS I have a floppy drive shield is in the main
main options for the legacy diskette a 1.44M set to become the Disabled
or F1 will be no option
electromagnetic power is not re-enter the time Or Disabled

you look at your motherboard is not some lost jumper, is the problem! ! Your motherboard is not in accordance with the requirements of the jack plug
For example, fans will be so small I inserted a plug or a partial.

Some fans is the jack 3.But the board is 4 Plug (There is a control the fan speed)
If you do not play right.F1 will appear each time the situation is that he
tips you have a motherboard BIOS error resume next shielding floppy or BIOS settings to try to restore the factory settings .To restore the factory settings may have to re-close the floppy drive.1 BIOS upgrade BIOS
2 issue of your serial data lines in question (mostly) into the BIOS, set up in the bottom of a 1.44M DISABLED, set
no error
this can be resolved!

not hard to identify, is not hard to see did not take a good line.BIOS, and then in the first years, ENTER hard to find