Can not boot on the issues

I have a newly installed computer, is the 430W power supply, can play all the things to bear in the play, but I boot, board lights (P5KSE the board, there are at the bottom of the green power light tips), drive – , CPU fan, power fan, the fan card can be transferred, but did not hear the system into the “DI” bang, and black screen display, after a few seconds after the display automatically put out the
how do I ask?
Are you able to COMS discharge?

memory of the song
re-inserted Haojiu Hang 1.memory is a parallel , To look for sellers, many people are buying this issue has been raised.
2.You may try the CMOS discharge the battery to get down and go back and add a few seconds, and so on.Memory be re-inserted again, there may be no memory compatibility Good
2.Motherboard jumper is not correct, according to the statement based on cpu jumper
this phenomenon in general has nothing to do with the coms is often more than
problems on this issue and I met! I installed capacity is the same! COMS discharge you can do it in the open can not! You can not look at the radiator and Kazakhstan not installed? Because it did not lead to a good start to install U of CPU temperature too high will start overheating and shutdown protection.I like the radiator is not installed on the boot for a few minutes less than the automatic clearance ! You try! Board lights (P5KSE the board, there are at the bottom of the green power light tips), drive-liang, CPU fan, power fan, the fan card can be transferred, but did not hear the system into the “DI” the voice — ———————– Memory board that did not pass the testing.Re-inserted memory or a for-ok on the