Is my motherboard fried?

i just got another hdd this morning and was mandated to activate one more sata opening throught bios pertaining to my computer to recognize it.everything was fine until eventually today when i notice a power current around the metal regions of my laptop or computer, felt somewhat like a vibration along with stopped when i unplugged this computer.i appeared to be already utilizing my computer system for quite a while today along with everything has been working beautifully.but following noticing in which vibration when i thought it might be because my partner and i turned in which second sata vent on.so my partner and i went in bios to turn it off also it looked for instance everything has been bleeding lower the tv screen, could not read it.so i believe i could have fried this by switching that more port in, what do you think in case it is usually fried, is that safe to help just obtain a new a single and change it similar to i said the rest of the parts are working fine

>I include never heard anyone utilize term “bleeding down” inside the screen before.That would certainly indicate a major malfunction someplace.Did you determine if anyone didn’t somehow expose an electrical connector might be dangling lower and touching a shiny part People were known in order to knock a little something loose when they get around there in addition to mess using parts.The vibration point has me stumped and lastly…it could very well be you possess a bad hard disk with a negative platter inside – that type of thing does happen from time to time – not necessarily frequently, in addition to generally, once the manufacturer is working with a problem using a whole order of areas (probably thanks to a bad lot of bearings and also something).The final known bad hard disk drive problem I’m sure of appeared to be the Seagate 1.5 Teribyte hard disk drive when it became available.I likewise am hearing plenty of bad reasons for the A FEW Teribyte tough disks which can be now coming out – I chalked it around people definitely not knowing the right way to set the idea up, nonetheless it seems you can find enough shouting about unsuccessful 3T tricky disks that we think WD, Seagate while others are taking a second take a look at the platter solidity.If this can be one of those new 3T devices, maybe which is your problem.Vibration ONLY proceeds from moving parts and you will discover only countless parts in the computer that move.So in the event you carefully checked to make sure there tend to be no wiring exposed or even touching, no cable is facing a fan by way of example, you possibly do have a very bad drive and I would take them back.That would be your first step.I would buy a different type, model or maybe size…not the exact same one if you don’t cannot get your money back.If the problem persists without the hard disk in the computer, you understand its anything else.So I would at very least take the brand new hard drive out if the problem goes away completely.

It may just be possible that you will find there’s manufactoring error together with your motherboard to do with that interface.

It could be that now you will find there’s current visiting that sata port, you’ve found the fact that motherboard features a loose ‘wire’ to do with that connection.

I’d help you either speak to who people bought it from, or your motherboard manufactors client service team to inquire about their assistance – when they deal when using the product regular and mainly likely may have seen this particular before and also advise you the way