I would like to ask you a master, how will I display the wrong color will become. Should have been …

All great color bias it! This is where to set the plane.Thank you very much!

display such problems may be three primary colors (R, G, B) not the same signal strength.If the video Not the same signal strength, may cause color cast.For example, red (R) video signal strength enough, the blue-image; green (G) video signal strength enough, the image will be a partial purple; blue (B) Video signal strength enough, the yellow-image.Because in the three primary colors, the relatively large percentage of green, so green display in charge of the electron gun is easier on aging, which is used in some of the old display for a long time, the color on Purple.If there is a soft color channel circuit failure can cause the same color cast.Color cast caused by the third reason is no secret to balance a good tune.Bright and dark balance constitutes white balance.In contrast and brightness are The dark, so that the parameters of the internal regulation of CRT brightness grating R, G, B color at the same time three or disappeared at the same time, if not black, raster background brightness of color cast will, therefore, resulting in image color cast.If it is because the circuit Issues, but also to repair, but if the balance is due to dark color cast caused by the display, because the use of professional equipment, including a number of individual maintenance departments will be very difficult to fit the tune.
Is also possible that it is more depressing, Oh, you can get.Display signal that the trapezoid lane of a joint-pin bends, graphics and sound did not touch the pin Flanagan get the OK on the straight.