Internet bars appeared boot BOOT FROM CD: DISK BOOT FAILURE INSERT SY …

Internet cafes have several such machines, so boot:
For Realtek RTL8110S/8169s Gigabit Etheret Controller V1.01 (030820)
PXE-E61:Media test failure, check cable
PXE-C0F:exiting PXE ROM
disk boot failure insert system disk and press enter
who know why, how to deal with?

Partition table virus have been destroyed or guidance document has been deleted, basically on two aspects, namely, to deal with:change discs to the hard disk IDE
line in the order to start the first line of the CD from the start, the normal term The first line should start from the hard disk, you boot into the BIOS settings del by First Boot Devive you can

in the BIOS, is the “start from the hard drive” (boot from disk it) as the first Will be able to drive from the start of failure, insert system disk and press enter
health if the hard disk to start, the hard disk in the system, then
from the CMOS settings for the hard disk to start, too much knowledge
Reference:/ guoguo6688/blog/item/64d1683d22bdcaec3d6d973c.html
———————— disk boot failure insert system disk and press enter
This can be interpreted as, disk failure of the guide, please insert the disk and return the system to continue, but if you do not have this in front of tips (BOOT FROM CD), then the system is the master boot disk problems in the area, type in the DOS command (fdisk / mbr) can be had.
—————-
For Realtek RTL8110S/8169s Gigabit Etheret Controller
set up your network card
start
Into the BIOS, with the LAN-wide Kwan items on the right!
—————-

PXE-E61:Media test failure, check cable
to the BIOS, card-related projects to start DISABLE out
——————