How to use U disk to the new hard disk loading system

I use the word “Lao Mao pick WinPE” tool to make a U disk boot disk, but I do not know how to use the U disk to the hard disk to a new system installed! Prawns called upon to help out, although few minutes, but I am only so many ….

U disk your computer And later to enter the same as you entered into the DOS command to open U disk system installed under the program SEtUP will be able to find a way to the U disk is set to start in the first set to be all right
– – loaded with U disk system …..Jiong bring GHOST32 and GHOST copy into the mirrored disk, USB boot into the PE, GHOST32 start to use it to restore GHOST image on your hard disk to the C disk.

In fact, the best way should be USB will be in volume production, with regard to the specific operation, said no more complicated because the interested can go to look for on-line.You give an introduction on how to make the U disk boot disk.I believe a lot of people have been following the U disk 256M ( Flash)

boot disk into the experience, I have two ways, is simple:

1) in the next WINDOWS directly USBOOT tools, according to the above tips will be able to do so step by step into

Gong.

2) in the first WINDOWS in the U disk, you can create a document of identification, such as the file name

BANK.TXT, it is important not You may do so under the DOS in the misuse of other disk format.

And then in pure DOS under (DOS7.0 to the version of the site to identify U), you have to find the establishment of BANK.TXT text

cases where the letter, for example, the letter is X:, orders FORMAT / SX:, this boot disk

also did not succeed, you want to use magic to U zoning tool PM The disk partition into active partition, so you will be able to set U

a guide.Boot into the BIOS, will be changed to start the first USB-ZIP, not all motherboards

this function, as far as I know more than 845 should start with U disk, so you have to set the U cited

function of the lead.With the U disk boot disk into the experience , I will be able to introduce the mobile hard disk to make Qi

move set, tool set, to lay a installation disk-based approach.

I would like to introduce the main mobile hard disk is to change Into a boot disk, CD-ROM because of the limited capacity after all,

CD set about 700M, DVD only 4.7G, which is a mobile hard disk mass storage, my hard drive is 40

G, you Can not limit the capacity of your hard drive into mobile your boot disk, a tool set, and even security systems

Zhuangpan.I think the mobile hard disk into a boot disk that you can discard the Zaqizaba CD-ROM Set Gong to a variety of

all in one, I think the mobile hard disk to start the prospect of doing incalculable.My hard drive into the mobile

boot disk, disk tools, disk installation method I hope that computer enthusiasts can bring some fun.

I have several ways, I will introduce one, I think is the better approach.

Now mobile Mass storage hard disk is generally dozens of G, put your mobile hard disk

a separate small areas, such as the 256M (256M and above should also be made boot disk, but I have not tried , The next step

I would like to try the feasibility), according to the above U disk boot disk to do the methods to make your hard disk to start moving

plate.Made after the restart Computer into the BIOS, set to start in the first USB-HDD (attention to the front of the U disk

is introduced USB-ZIP, because it is mobile hard disk, this should be set up as USB-HDD), from the preservation and re – Qi

computer to see if you can guide the U disk (as long as you do what I say, should be able to guide, or else you

the motherboard does not support or do you have a way False), there is no success? If successful, well, we

to the next step.

Unplug mobile hard disk, restart your computer, the system starts to WINXP, mobile plug Hard drive, the system will automatically identify

your mobile hard disk, right-click My Computer – management – disk management, your mobile hard disk space

the rest of the re-zoning, divided into Several district to the root of your needs and the size of the mobile hard disk.

Mobile hard drive of the first district in the establishment of TOOLS directory, the one your DOS computer maintenance tools added, was also

to be added to the plate at a conversion tool:LETASSIG, I do not have the authority uploading annex, you go online to search

download, mobile hard disk partition on the other to create a directory WINXP , And then your XP installation disk

Kaodao directly to the directory.At this point, your multi-function mobile hard disk boot disk's it.

Here in the CD do not rely on the case Use your mobile hard disk for your computer system installed:

into the BIOS to start in the first set into a USB-HDD, re-insert the mobile computer hard disk, you will be made after the start

you are The mobile hard disk drive into a set C, and fixed the hard disk drive into a disk D, here on

have had a conflict, in order to upload a fixed hard disk system, will process your C disk (that is, mobile hard disk) into the

information guide, it is necessary to install successfully on your hard disk boot partition into a fixed disk C, your mobile hard disk

D into a disk.To resolve this problem, do the following order:

CD TOOLS

LETASSIG C = D:D = C:

point your mobile hard disk guide D Division into a disk, fixed the hard drive boot partition into a set C, the following

will be able to use mobile hard drive loaded to the system.

If you set up mobile hard disk The directory WINXP (on the CD copy of this list below)

is the letter X:, enter the X disc, the following order:

CD WINXP

CD I386

WINNT

now Well, now you can sit down and Paoshang slowly waiting for a cup of tea.

Note:When copying files to install WIN End to restart the computer after the You have to move off the hard disk, or

machines also will move from the hard disk to start.Following the installation of ordinary matter and the system is no different.

With just LETASSIG C = D:D = C:command to change the drive letter, restart the computer will automatically resume after the letter

as the original, you do not need manual intervention.You tune into a U disk launched.As long as you run the installation disk U file Is not it.Partition first and then put into the system.Installer put the system into the U disk.
If it can not dos in the U-disk loading, winpe u disk version, a few dozen M 20 M The all;
then on the selection of U-boot disk to start, decompression system installer, double-click setup.exe or win.bat, and then restart automatically start the installation