CAD printing problem

U disk with others to open up copy of the map, how to use the simplest method does not make it garbage? There are no plans to print out (map is good, not on the print preview, with a different map, print out the Print Preview with the same, that is, some of the irregular profile pomiantu and some lines do not print out), thanks to!

that there may be a high-image version of the CAD, and CAD your version of the compatibility problems caused by the proposed You go to a special agency to print on a map if you only need to print, do not need amending.Let each other directly output format DWF drawings sent to you.
Directly to your browser and print no problem.The simplest and most Practical ways to open the drawings, a direct copy, Ctrl + n New, and then paste all the lines in the election by default on all the layers at OK.And then print it.Loaded two versions, 2006 must be installed .2007 Or 08.09.07 from the start of the use of code words in different ways, if you do not have to upgrade SP.07 after playing 06 the previous version of the document text will definitely have a problem.
One more, you say the lines, this can be used to print Style resolve.As long as you allow customers to print when the paper used to print style will be able to bring together the.Absolutely no problem.Fonts to download a large number of bank documents, high-down version compatible.Highest version installed on it.There are plans by some as Tianzheng 2nd rendering software, so you can only open part of the map is also normal.You can check with the next customer is what the CAD drawing, whether through the development of the 2nd of CAD The production version.The problem can be solved also allows customers to convert the CAD plans DXF files to PDF or print to achieve.