Physical drive ban

Using this software, installed after the game I would like to, but I can not find a computer, how to restore it

I.
Hardware failure or conflict did not start the system detects this CD-ROM hardware.Characterized by its performance in the windows
appear before the graphical interface, the system detects the hardware is not CD-ROM.This CD-ROM “lost” as
are generally took place in a user-swappable chassis to open hardware, such as CMOS settings or after the operation.
Optical drive back a result of the press is following the order for the inspection of hardware:
1.If the second IDE drive then I should check CMOS in the second IDE port is open.
because some of the main board can be manually shut down the second IDE port.
2.inspection data line drive , The power cord connection is secure.
3.'s Drive jumper settings are correct, this is a major new drive to install a second or two
optical drive into a situation.
4 .'s Drive and the data line used by the IDE the mouth is damaged.I had experienced damage to the second IDE port
, causing loss of drive.Inspection process can be taken with the swap IDE hard disk interface, the exchange of data
Hard line and articulated in the same IDE port and so on, to see when they boot the system detects whether the CD-ROM.After
to 4 on the inspection of the power to restart the machine, the system can be Detection equipment to the CD-ROM (if still not detected, they should consider
drive has bad).
II CD-ROM driver is not compatible
this loss occurred in the installation CD-ROM, such as graphics device driver Upgrade or motherboard driver Qi
and re-fixed after the windows.At this point if the inspection windows “Control Panel”, “System Properties” in the “control equipment
grounds”, “hard disk controller” will be With a yellow exclamation point of the display device.”Control Panel”
“System Properties” in the “performance” is a computer show in the work of the MS-DOS compatibility mode.
Fault for this reason, The following two methods to solve:
1.Delete the “System Properties”, “Device Manager” in the “hard control” of all the equipment,
and then restart the machine.
2.Reinstall the normal use When the driver of the motherboard, and then restart the machine, the general will be able to drive back
(for example, the two methods is the “Device Manager” and “performance” of returning to normal, so that the drive can not use the words
, Please use the following reasons for the fourth solution).

Three, the computer is infected with certain viruses such
caused by the virus due to the failure of the prominent characteristics of the equipment is not installed any drivers, but
“Control Panel”, “System Properties” in the “performance” shows a computer in MS-DOS-compatible
side, this time to use antivirus software to deal with anti-virus, after restart back drive (On the computer at work
MS-DOS compatibility mode is also the reason may be due to the system starts to load the real-mode DOS program created by the
, but this will not lead to a general loss of drive).
Fourth, due to some unforeseen circumstances, such as
Wushan Chu may be the drive, restart the system, such as death caused by loss of drive.May try to use the following method
resume:
1.Editor and CONFIG.SYS AUTOEXEC.BAT file.If there are windows have been banned CD-ROM drive activities
program, open the manual, or hand-loading optical drive of the DOS driver, and then restart the machine.
2.With CD-ROM The installation disk in the windows of the MS-DOS mode installation CD-ROM drive and restart the machine
.Get back in the system drive and then manually edit the AUTOEXEC.BAT and CONFIG.SYS files, disable the CD-ROM
The DOS driver, the system can return to normal.Right-click My Computer – properties – Hardware – Device Manager – CD-ROM to see if there if they do not exist right – scanning hardware changes in general can come back to find
If there is, then uninstall it first, and then scan hardware changes that they may turn to come back